TRANSMISSION INSTALLATION

Type I, II, III Transmissions

NAG1 722.6 | 8HP90 | 8HP95 | 8HP70 | NAG2 722.9

!!ATTENTION!!

YOUR NEW SOUTHERN HOTROD TRANSMISSION IS SHIPPED WITHOUT FLUID!

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN TRANSMISSION DAMAGE!

DO NOT DYNO YOUR VEHICLE UNTIL THE TRANSMISSION BREAK-IN IS COMPLETE!

INSTALL FRESH TORQUE CONVERTER! (NEW OR CUT & CLEANED)
**NAG2 722.9 w/ startup clutch, STARUP CLUTCH MUS BE REPLACED.**
FLUSH Cooler lines
FLUSH Thermostatically controlled cooler valve block
FLUSH Transmission cooler

FILL Transmisson with fluid (ONLY USE SOUTHERN HOTROD APPROVED FLUID)
ALL 8HPxx transmissions should be bench filled
Install your NEW SOUTHERN HOTROD LLC Performance Automatic Transmission!

Reset TRANSMISSION ADAPTATION
Perform QUICK LEARN (8HPxx ONLY)
Ensure that there are no DTC's present in vehicle, e.g. Transmission, Engine, ABS, etc...
Correct all faults prior to transmission operation

PERFORM TRANSMISSION BREAK-IN

QUESTIONS? PLEASE VISIT OUR SUPPORT PAGE OR CALL US AT 888.244.4364

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN TRANSMISSION DAMAGE!

8HPXX TRANSMISSION ADAPTATION AND QUICK LEARN PROCEDURE CLICK HERE

NAG1 TRANSMISSION ADAPTATION PROCEDURE (MOPAR) CLICK HERE

SOUTHERN HOTROD APPROVED TRANSMISSION FLUID

TRANSMISSION BREAK-IN PROCEDURE CLICK HERE

v240822a